6.LT-98 Modified Starch.
Application: Lt-98 modified starch are widely used in sizing T/C, T/R, pure cotton and ramie warps of high, middle and low grade. While being mixed, it should be poured in high-speed dasher bucket ( as it is a high-thickness low-viscosity one, higher solid mixture ratio than custom are applied. ). After mix it evenly, please rise the temperature to 95 centigrade-degree, keep for 30 minutes Then it will be ready after its thickness and volume are set. Generally, it can be substituted for 30% - 45% PVA and giving good satisfaction.
Technology Parameters
1. MPa.s: 10-40 Viscosity
2. Appearance: White or light yellow powder
3. Percentage of moisture ≦14。0
4. Percentage of ash≦0。35
5. Fineness≧99。0（100 sift） ( 100 eye survey )
6. Stain number/cm2: ≦3.0
7. Acidity≦1。0
8. Protein ≦0。55
9. PH：7-7.5
10. Viscosity stability % ( viscosity 6%, 95 centigrade degree, keep 3h ) :≧85

7.Agent for Modifying Starch
1. Quality index
（1）appearance: white powder（ moisture ：≦14%（3） fineness ：≧99.0（ eye survey
（4）7-9 pH
2. Product properties
1. Mixed with starch in the dasher bucket, it contributes to modifying the starch while the temperature is rising.
2. Easy operation, widely used for T/C, T/R, C/R, pure cotton and viscose products.
3. Good solubility with chemical glue size.
4. Good abrasion-resistance film, easily desized.
Operation guide and packing
While dashing, please pour the agent as much as 5%-6% of the starch weight to the bucket directly. The operation method is as same as before.
For easily operating, 500g agent is packed in a bag, 20kg a carton. Please keep it in dry and ventilated place. Its guaranteed quality life is 6 months.

8.High-performance Smooth Agent
1. Product properties
(1). Good emulsifying property and high stability.
(2). 100% virtual composition
(3). Good dispensability in water, diluted by water at any ratio
(4). Fair acid and alkali resistance and hard water resistance.
(5). No poison, no corrodibility.
2. Operation guide
Pour into mixing bucket directly according to users' technic, 1%-2% of the glue size weight.
3. Application and packing
For sizing cotton, ramie, chemical and other blended yarn, 1000g per plastic bottle or 20kg per plastic bucket, for conveniently use.